Cisco Meraki CW9164
High Performance Wi-Fi 6E Wireless

מאפייני המערכת:

Tri–radio aggregate frame rate of up to 7.49 Gbps*

A 6 GHz 4x4:4, 5 GHz 4x4:4, and 2.4 GHz 2x2:2 radio offer a combined tri–radio aggregate frame rate of 7.49 Gbps*. Technologies like transmit beamforming and enhanced receive sensitivity allow the CW9164 to support a higher client density than typical enterprise-class access points, resulting in better performance for more clients from each AP.

Multi User Multiple Input Multiple Output (MU-MIMO)

With support for features of 802.11ax, the CW9164 offers DL and UL MU-MIMO and OFDMA for more efficient transmission to multiple clients. Especially suited to environments with numerous mobile devices, MU-MIMO and OFDMA enable multiple clients to receive data simultaneously. This increases the total network performance and improves the end-user experience.

IoT and Bluetooth Low Energy Radio

An integrated Bluetooth radio provides seamless deployment of Bluetooth Low Energy beacon functionality and effortless visibility of Bluetooth devices. The CW9164 enables the next generation of location-aware applications while future-proofing deployments, ensuring it’s ready for any new customer engagement strategies.

Automatic cloud-based RF optimization

The CW9164’s sophisticated and automated RF optimization means that there is no need for the dedicated hardware and RF expertise typically required to tune a wireless network. The RF data collected by the dedicated fourth radio is continuously fed back to the Meraki cloud. This data is then used to automatically tune the channel selection, transmit power, and client connection settings for optimal performance under even the most challenging RF conditions.

Integrated enterprise security and guest access

The CW9164 features integrated, easy-to-use security technologies to provide secure connectivity for employees and guests alike. Advanced security features such as AES hardware-based encryption and Enterprise authentication with 802.1X and Active Directory integration provide wired-like security while still being easy to configure. CW9164 will also support 192-bit encryption along with WPA3 support for added security of the wireless network.

One-click guest isolation provides secure, Internet-only access for visitors. PCI compliance reports check network settings against PCI requirements to simplify secure retail deployments.

Dedicated scanning radio delivers 24x7 Air Marshal and RF analytics

There’s no need to choose between wireless security (AirMarshal), advanced RF analysis, and serving client data. A dedicated scanning radio means that all functions occur in real-time without impacting client traffic or AP throughput.

The CW9164’s dedicated tri-band scanning radio security radio continually monitors the environment, characterizing RF interference and containing wireless threats like rogue access points. Containment is only possible in the 2.4 GHz and 5 GHz frequencies as 6 GHz requires Protected Management Frames (PMF).

Enterprise Mobility Management (EMM) & Mobile Device Management (MDM) integration

Meraki Systems Manager natively integrates with the CW9164 to offer automatic, context-aware security. System Manager’s self-service enrollment helps to rapidly deploy MDM without installing additional equipment and then dynamically tie firewall and traffic shaping policies to client posture.

Application-aware traffic shaping

The CW9164 includes an integrated layer 7 packet inspection, classification, and control engine, enabling the configuration of QoS policies based on traffic type, helping to prioritize mission-critical applications while setting limits on recreational traffic like peer-to-peer and video streaming. Policies can be implemented per network, SSID, user group, or individual user for maximum flexibility and control.

Voice and video optmizations

Industry-standard QoS features are built-in and easy to configure. Wireless Multimedia (WMM) access categories, 802.1p, and DSCP standards support all ensure important applications get prioritized correctly, not only on the CW9164 but also on other network devices. Unscheduled Automatic Power Save Delivery (U-APSD) and Target Wait Time feature in 802.11ax clients ensure minimal battery drain on wireless VoIP phones.

Self-configuring, self-maintaining, always up-to-date

When plugged in, the CW9164 automatically connects to the Meraki cloud, downloads its configuration, and joins the appropriate network. Administrators can schedule automatic firmware upgrades for their Dashboard network seamlessly. This ensures the network is kept up-to-date with bug fixes, security updates, and new features.

Meraki Health

CW9164 will support all the latest and greatest analytics to provide AI/ML anomaly detection, server root cause analysis, wireless client scoring based on performance and connectivity metrics, and network benchmarking for networks of similar size and vertical. Along with these features, CW9164 will provide advanced location analytics via API and graphs in the dashboard to provide a clear picture of client density and their movement across the floor plan.

Choice of Management Mode

Cisco Catalyst 9164 series access points can be managed either on-premises with Catalyst 9800 wireless LAN controllers (WLC) or cloud-managed through the Meraki dashboard. Customers have the flexibility to deploy these access points in one management mode and migrate to the other in the future.

מפרט טכני:

Category	מפרט טכני
Radios	2.4 GHz 802.11b/g/n/ax client access radio 5 GHz 802.11a/n/ac/ax client access radio 6GHz 802.11ax client access radio 2.4 GHz, 5 GHz, and 6 GHz tri-band Air Marshal WIDS/WIPS, spectrum analysis, & location analytics radio 2.4 GHz Bluetooth Low Energy (BLE) radio with Beacon and BLE scanning support Concurrent operation of all five radios Supported frequency bands (country-specific restrictions apply): Tri-band mode: 2.412-2.484 GHz ISM 5.150-5.250 GHz (UNII-1) 5.250-5.350 GHZ (UNII-2) 5.470-5.600, 5.660-5.725 GHz (UNII-2e) 5.725 -5.825 GHz (UNII-3) 5.925 to 6.425 GHz (UNII-5) 6.425 to 6.525 GHz (UNII-6) 6.525 to 6.875 GHz (UNII-7) 6.875 to 7.125 GHz (UNII-8)
Antenna	Integrated omni-directional antennas 2.4 GHz: Peak gain 3 dBi, internal antenna, omnidirectional in azimuth 5 GHz: Peak gain 5 dBi, internal antenna, omnidirectional in azimuth 5 GHz: (XOR) Peak gain 5 dBi, internal antenna, omnidirectional in azimuth 6 GHz: Peak gain 6 dBi, internal antenna, omnidirectional in azimuth
802.11ax, 802.11ac Wave 2 and 802.11n capabilities	UL/DL-OFDMA Target Wait Time (TWT) BSS coloring* SU-MIMO and DL MU-MIMO support Maximal ratio combining (MRC) 802.11ax beamforming 20 and 40 MHz channels (802.11n) 20, 40, 80 MHz channels (802.11ac Wave 2) 20, 40, 80 and 160MHz channels (802.11ax) Up to 1024-QAM on 2.4 GHz, 5 GHz and 6 GHz bands Packet aggregation - A-MPDU (transmit and receive), A-MSDU (transmit and receive)
Interfaces	1x 100/1000/2.5G/5G BASE-T Ethernet (RJ45) 1x DC power connector (5.5 mm x 2.5 mm, center positive) USB 2.0 at 4.5W Console - Only available in DNA Management Mode Environmental Interfaces - Only available in DNA Management Mode
Mounting	All Cisco standard mounting hardware supported (AIR-AP-BRACKET-2 included) Desktop, ceiling, and wall mount capable Ceiling tile rail (9/16, 15/16, or 1 ½” flush or recessed rails), assorted cable junction boxes
Physical Security	Two security screw options (included) (13.5 mm long and 2.5 mm diameter and 5 mm head) Kensington lock
Environment	Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C) Nonoperating (storage) altitude test: 25°C (77°F) at 15,000 ft (4600 m) Operating temperature: 32° to 122°F (0° to 50°C) Operating humidity: 10% to 90% (non-condensing) Operating altitude test: 40°C (104°F) at 9843 ft (3000 m)
Reliability	Mean Time Between Failure (MTBF): 998,440 hrs at +25°C operating temperature
Physical Dimensions	9.5 x 9.5 x 2.2 in. (241.3 x 241.3 x 56.9 mm) Weight: 3.54 lb. (1.60 kg)
Security	Integrated Layer 7 firewall with mobile device policy management Real-time WIDS/WIPS with alerting and automatic rogue AP containment with Air Marshal Flexible guest access with device isolation VLAN tagging (802.1q) and tunneling with IPsec VPN PCI compliance reporting WEP*, WPA, WPA2-PSK, WPA2-Enterprise with 802.1X, WPA3 - Personal*, WPA3 - Enterprise*, WPA3 - Enhanced Open (OWE)* EAP-TLS, EAP-TTLS, EAP-MSCHAPv2, EAP-SIM TKIP and AES encryption Enterprise Mobility Management (EMM) & Mobile Device Management (MDM) integration Cisco ISE integration for Guest access and BYOD Posturing
Quality of Service	Advanced Power Save (U-APSD) WMM Access Categories with DSCP and 802.1p support Layer 7 application traffic identification and shaping
Mobility	PMK, OKC, & 802.11r for fast Layer 2 roaming Distributed or centralized layer 3 roaming
Analytics	Embedded location analytics reporting and device tracking Global layer 7 traffic analytics reporting per network, device, and application
LED Indicators	1 power/booting/firmware upgrade status
Regulatory	RoHS
Warranty	Lifetime hardware warranty with advanced replacement included
Power	Power over Ethernet: 42.5 - 57 V (PoE+ and UPoE compliant) DC Power Adapter (54V) Power consumption: 30W to 50W (UPoE) Minimum power requirement: 30W (PoE+, USB is disabled) Power over Ethernet injector and DC adapter sold separately Note: Actual power consumption may vary depending on the AP usage.

PoE power consumption	2.4 GHz radio	5 GHz radio	6 GHz radio	Link speed	USB	Link Layer Discovery Protocol (LLDP)
802.3bt (UPOE)	2x2	4x4	4x4	2.5Gbps	Y (4.5W)	30.5 W
802.3at (PoE+)	2x2	4x4	4x4	2.5Gbps	N	25 W
802.3af (PoE)	—	—	—	1Gbps	N	14 W
DC Power	2x2	4x4	4x4	2.5Gbps	Y

* software features can be enabled via firmware updates

הורדת מפרט טכני:

Download the Cisco Meraki CW9164 Wi-Fi 6E Indoor AP Datasheet (PDF).

Download the Cisco Meraki MR Family AP Datasheet (PDF).